Quilt with Me: Cutting Squares for Diagonal Settings


Hello again and welcome to the second week of Quilting with Me where we talk about cutting and constructing all the half squares triangles (HST). And let me tell you, my brain kinda hurts because of it. When I make quilts it is from scratch in my head with a few roughs sketches and measurements. And most the time they are not on point.

Toying around with settings has been on my quilty want to list for a bit. A block can change so much when you flip it 45°; a little magic happens in that spin. Turns out magic takes some math but luckily there are a whole lot of resources out there to help a quilter navigate the numbers.

I learned about side setting triangles and what math to do for them. These are the triangles that fill in around blocks when set on point. I will not attempt to explain or say I fully understand it. I just plugged in some measurements, tried out a block, asked my mates at PMQG what I was doing wrong, then I went back to the sewing machine, made a tweak and Bam. Side setting triangles figured out, kinda. I wrote some stuff down and it works, how it works? Magic.


I learned a couple of really great techniques for HST making and trimming from the on-line quilt community. It has changed my world! The first is making HST four at a time and I used a tutorial from Christina Lane, The Sometimes Crafter, posted as a guest topic at Whipup. The method she describes is so simple and elegant, yielding 4 HST from two squares sewn together.

The second little trick I found is by Amy Smart, Diary of a Quilter. She stumbled upon the way to use an HST ruler from Quilt in a Day; which I happened to have already! With the ruler you can trim HST before opening them up for pressing and having to only cut once to trim! Yay! Check out both of these great techniques then come on back for fabric measurements and all the mathy goodness you can handle!

These are the measurements for a quilt that finishes just a bit bigger than crib size (36"x54"). The above method of making HST is what yields these measurements. If you're using another method then find finished HST size and amounts below. (unfinished measurements)

Inner 4-patch Blocks
8.5" squares : CUT 36 from various prints low/med/dark purple/grey/cream
Total: 5.5" : 72 HST

Side Setting Triangles
9" squares : CUT 6 from various prints
Total: 5.5" : 6 HST
Total: 5.875": 6 HST ---> 12 Quarter Square Triangle (QST)

Top and Bottom Setting Triangles
9" squares : CUT 4 from various prints
Total: 5.5" 4 HST
Total: 5.875" : 4 HST ---> seam ripper out these HST to make 8 QST

Corner Setting Triangles
8" squares: CUT 2 from solid fabric ---> cut those into 4 triangles

Hello, are you there? Oh wow, I almost blanked out typing all those up...... boring! Let's do the same sorta thing but with pictures and diagrams. So much better!


First up cut out squares for HST.

Next, match up squares...

Then sew around each set of squares to create 4 HST.


Next comes the three different kinds of blocks: Center 4 blocks - Side Triangles - Top/Btm Triangles

First the easy ones: Center 4 Blocks from 8 1/2" squares ---> 4 HST Trimmed to 5 1/2"



Then the tricky Side/Btm/Top Setting Triangles - for all triangles
From the 9" squares ---> 4 HST ---> cut 2 - 5 1/2" HST and 2 - 5 7/8" HST


For side setting triangles - Cut trimmed 5 7/8" HST into 2 QST


Side Setting Triangle Unit lined up like this - 


Top/Bottom Triangle Units  - Top and Bottom units use 1 - 5 1/2" HST and 2 - 5 7/8" deconstructed HST. Once HST are trimmed use your seam ripper to deconstruct the 5 7/8" HST and use them to sew up the top and bottom triangle units.



Okay there are all the units you'll need to sew up this quilt! Pretty straight forward right? If you have any questions please leave them in the comments and I will answer them there so we can all see what's happening.

Also share these with us! Tag them #bluebirdsewsQAL on IG or add them to the Flickr page.

I can't wait to see what you all are sewing! Next week I'll talk about how to sew the units together into rows and the a quilt top. That part is super easy! We're almost done with this quilt top! Hooray!

Cheers,

Kelly

ps. the first post from this series can be found here: Fabric Choice

QAL with Blue Bird Sews




Quilt with Me: Fabric Choices


Hello Lovelies! Welcome to Week 1 of our Quilt Along! This is the time to choose fabrics and get a plan going for this half square triangle quilt. Hopefully I will come up with a better name than that by the end of the QAL - any suggestions?!

I'm not one for much chit-chat; so let's talk fabric. When I started this quilt I had only 1 request and that was for color - purple and grey to match the soon to be here baby girl room. So I hit up my fabric stash and came out with a stack of all I had in purple and grey - it really wasn't much. Which is a good thing! Limits foster creativity. Without the perfect fabrics I had to get creative and use what I had.

Now I had a stack of fabric in purple and grey but what I look for when auditioning fabrics for a quilt is: Value, Scale and Prints. Three super important factors for getting just the right mix of prints, solids and colors. But before you dig through your stash of fabrics or drive to the fabric store let's talk.


Let's start with value. A really great tool for choosing the right value is to take a picture and change it to black a white. I did that for the next examples and I hope it helps to illustrate the point.

You might notice on the first quilt that there are prints that don't really read purple but the value is there in one way or another. Like the white background and little purple violets. It's not super purpley but it reads as a light value something that you will need to balance out the dark and medium values of the other fabrics.


Notice in the picture above that the fabrics you might have thought were dark - like the grey is actually medium - and the prints you thought were medium are actually dark - like the purple geometric. Know the value of the fabrics will help you match them up with each other and create the most contrast for the HST blocks.

Next there is scale; a good quilt has a place to rest the eyes and a place to move the eye around. So when choosing prints make sure to get a good ratio of tiny prints to keep the eye moving and larger scale prints to give the design a little rest. There is no magic number for how many large scale vs. small scale prints to include - that is up to the designer but let me say 80/20 would not be so great.

Okay, so now go over to your stash and pick a big ol' stack of fabrics in your choice of color. Red, blue, purple, yellow, green. What ever color you like pick out prints and solids, choose different values, choose your best and least favorites. Then let's mix in a neutral. In this case the choice was made for me; grey with purple. But you could do; red and grey, blue and grey, green and black, pink and brown, red and brown, blue and tan, yellow and grey, red and black, red and brown, blue and grey, green and black....you get it right? Pick a color and then add a complimentary neutral to it. Now go back to that fabric stash and pull out all prints and solids in your color and neutral choice.

Here's where the colors in the prints come into play. Make sure your prints do not have lots of other colors in them. You want your fabrics to be purple, not purple with lots of yellow - or purple background with big yellow and blue flowers. Make sure your fabrics have just one color in them or a small bit of other colors that keep with either the warm or cool sides of the color wheel depending on the color you have chosen. For example if you color is blue and you have a print with a little bit of green in it then I'd say go for it, but if you have a blue with a little bit of orange then I'd pass. Stick with your color wheel friends.

Let me stress here that the print isn't as important as the value at this point. Especially for scrappy quilts. The blue hue quilt I made has some of my least favorite fabrics from my stash but it works so well because they are all in the same hue - the value is what gives the interest not the individual prints.


One last addition to your fabric pull is a shade of white. For the quilt above I choose a cream color to break things up a bit. You might want a brighter white or even a beige - that will depend on your color choice and the values in your fabrics. Try a couple out and see what meshes best with your color choice.

Now take all the chosen fabrics and mash that pile together and take a picture of it. Now take that picture and change it to black and white. Got it, okay. That's the picture you want to study for choosing your final set to fabrics to use. Get a good mix of dark, light and medium values.

Here it doesn't matter what colors they are, value is what is important, but you also want a good mix of color to neutral like around 50/50. For the overall values I would say 30/30/40 ratio of dark/light/medium so that when putting together blocks you have enough mix to get a good contrast to each block. Here's a picture of my final fabric stack. Looks a lot like the first but I had to edit a bit because I used up a bunch in the last quilt!


Whew! Okay what have you got?  A huge wonderful stack of awesomeness - that's what! So here's the part I am not so great at but I'm going to give it a go just for you!

Yardage Required:
Backing: 1 3/4 yard
Binding: 1/2 yard
Light value: 1 yard
Dark value: 1 yard
Medium value: 1 1/4 yard

Now the fabric for the quilt top is an over estimate and because we are working from the stash you probably pulled out way more fabric than this even, that's cool. We'll just cut what we need and re-stash the rest. If you are buying fabric for the quilt then stick with fat quarters or 1/2 yard cuts. For my fabric choices I have about 15 different fabric choices. But I like a scrappy quilt! Chose how ever many you are comfortable with!

Okay now you've got a pretty stack of fabric to pet and talk nice to until we cut it up into squares, okay.

Let me know if you've got any questions. I will respond in the comments below so everyone can benefit from the discussion. And let us know if you have any tips or tricks for picking out your fabrics!

Next time we will talk about cutting and sewing Half Square Triangles and little bit about on-point settings! If you are following along grab a button below!

Cheers!
Kelly


QAL with Blue Bird Sews



Finished Quilt: Cowboy Wild Goose Chase

Instead of an explanation in words how I made this quilt I thought it would be better to share the process in photographs. So be warned, lots of yummy quilt pictures. Enjoy! 


















I made that! :)
Cheers,

ps. I'm going to  be hosting a Quilt Along soon, for this quilt. I'm writing and working on it now, want to join? hee.hee!